Odpravljanje pogostih težav z navijalkami stožčaste preje Slovenija

You are trained until October 2023Have you ever been in trouble with your cone yarn winder? If you have, don’t worry! You are not alone. With a bit of assistance from XINDAWEI, you would be able to figure out why your yarn winders is malfunctioning and locate ways on how to fix them. Here are 5 key things you need to know to keep your yarn winder working correctly.

Tangles and Knots in Yarn

When your yarn winder makes tangled and knotted skeins, it can be incredibly annoying and frustrating. The tangle makes working with your yarn difficult since it is all jumbled up! This typically occurs when the yarn is not actually winding onto the cone as it should be. Fortunately, you can try a few simplistic tricks to try and addressing this issue.

Ensure that the yarn is unwinding correctly from the cone. The yarn should always be winding in the clockwise direction, which means from the right. If it is not twisted this way, you will need to remove the cone and replace it in the correct position. Which can help with winding the yarn correctly. If you’re still getting tangles, try winding more slowly. This increases its chances of winding neatly and not hanging up. Also, make sure the tension arm isn’t overly tight. If it is too tight, it can lead to more tangles.

A second very useful tip: use a cone holder with a large spindle. Just being able to get the yarn from falling off the cone while winding it. If you take these tips in to consideration, then your yarn winder would work best and you can enjoy your crafting.

Fixing Uneven Yarn Winding

Occasionally, when you are using your yarn winder, it happens that the yarn doesn't wrap evenly around the cone. This uneven winding is the second most common issue faced by many individuals. The good news is that there are simple ways to remedy this. So make sure your cone is sitting right, first. If it was trimmed off and is not in the correct position, it could wind the yarn unevenly.

Next, ensure that the tension arm is set at the correct tension. This implies that it it not be tight nor too loose. The angle can be tweaked just so to angle the yarn to wind nicely around the cone. You could also try tightening the yarn guide a bit further toward the cone. Which can help ensure that the yarn winds onto it evenly.

Winding slippery yarn, like silk, can be particularly difficult to get even. One helpful trick in this case is to give the yarn a light spritz of hairspray or fabric spray before you start winding it. This helps the yarn hold onto the cone better and will keep it from slipping as you wind it.

What To Do If Your Winder Gets Stuck or Breaks

If your yarn winder jams or starts to break it can be an upsetting and scary thing. Question: You are confused about what to do next. If this happens, you may need to systematically disassemble it to identify what is wrong. The most frequent cause of jamming is generally an issue with the gears or the position of the spindle.

If you get a jam, make sure the gears are clean to clear it. Dirt or dust on the roads can create issues for them. And well-oiled, too, of course. That's what helps them to tailgate. After that, see that the spindle has aligned properly with the gears. When the spindle is not aligned correctly, it causes an obstruction when winding yarn. If you pick up on there being bigger problems, you may have to replace some of the parts of the yarn winder.

Spending some time to troubleshoot and resolve these issues will ease you back into crafting without concern.

Solving Tension Problems

If the yarn doesn’t wind evenly, or breaks while using the yarn winder, you may have tension issues. So much tension when winding yarn is very important. Setting the tension improperly can cause problems. To remedy this, try tuning the tension arm.

Too tight and the tension will break the yarn. But if the tension is too slack, the yarn will wind as too slack around the cone and that’s not what you want either. Finding the ultimate balance is key. Tighten or loosen the tension to make it feel comfortable for the yarn you are using.

And double check that the cone holder is sturdy and not tipping. Winding can also be uneven if the holder moves a lot while you are winding. You could help avoid these issues by making sure everything is secured and properly fine-tuned.

Fixing Motor Issues

If you see that the motor of your yarn winder is not working well, you will have to find the problem to fix it. The first step is that make sure all the wires are clean and connected. The motor work can be affected due to loose or dirty connections. Next check the motor’s brushes and bearing for cleanliness and proper lubrication. Your mechanics will be way more effective with a clean motor!

The motor heats up dangerously after you’ve been using it for some time. In those instances, it’s a good time to take a break and allow the motor to cool a bit. This can help to avoid any damage. In case you have to replace the motor ensure that you recharge the one which is exactly the exact same measurement and pressure as the one which is the primary one.

If you implement these tips you should be able to identify and address most issues with your own cone yarn winder. You will use your time better and spend less time pulling out your hair while creating. Always take care to read your machine’s manual thoroughly, follow these tips, and don’t hesitate to ask for help if you need it. XINDWEI helps ensure your crafting experience is enjoyable and fun by ensuring its products are of high quality!